Exsil 80 Kolonlar, 1.5, 3, 5 ve 10 μm partikül boyut seçenekleri
80 Å,
0.51 cc/g,
226 m2/g 150 m2/ml
Type A Silica and Bonded Phases
Alternative to Spherisorb
Available in 1.5, 3, 5 and 10 μm particle sizes.
The Exsil 80 range has a higher surface area and greater
retention than the original Exsil 100 which in some instances provides a better
alternative to Spherisorb.
New is the addition of a 1.5μm ODS phase to allow faster separations of
current applications. When used with appropriate hardware, efficiencies of over
200,000 plates/m are achievable in 3 to 5 cm columns. The range of phases
continues to provide a comprehensive selection for all standard applications.
| Vendor | Exmere Technologies |
| Brand | Exsil 80 |
| Mode (Phase) | Reversed |
| Modification | Silica/C18 |
| Poresize, A | 80 |
| pH stability | 2.0 – 8.0 |
| Max pressure, psi / bar | N/A |
| Surface area, m2/g | 225 |
| Carbon load, % | 12 |
| Operating temperature | 60 |
| Endcapped | Yes |
| Particle Diameter (um) | 1.5, 3, 5 and 10 um |